噴淋清洗機設備主要采用不銹鋼制造，在一定程度上完全符合食品工業的使用標準。所有精密零件均在加工中心制造。在設計過程中，它是非常合理和非常低的失敗。

Spray cleaning machine equipment is mainly made of stainless steel, to a certain extent, fully meet the food industry standards. All precision parts are manufactured in the machining center. In the design process, it is very reasonable and very low failure.

噴淋清洗機設備主要利用設備現場的剪切力和氣泡的空化腐蝕進行清洗。在制備過程中，可以有效地利用其特殊的農藥洗脫液對物理沖擊進行浸泡和回收，有效去除農藥殘留，達到高效、清潔、安全的農產品，全、批量、低成本的效果。

The equipment of spray cleaning machine mainly uses the shear force and cavitation corrosion of bubbles to clean. In the preparation process, it can effectively use its special pesticide eluent to soak and recover the physical impact, effectively remove pesticide residues, and achieve the effect of efficient, clean and safe agricultural products, full, batch and low-cost.

噴淋清洗機設備在一定程度上，主要由除蟲裝置、氣泡發生機構、清洗槽、水過濾循環裝置、物料輸送裝置和清水噴淋裝置組成。在實際生產過程中，許多設備可以連接和使用，因此電機的水發生裝置可以安裝臭氧，設備和材料滿足食品出口的衛生要求。

To a certain extent, the equipment of spray cleaning machine is mainly composed of insect removing device, bubble generating mechanism, cleaning tank, water filtering circulating device, material conveying device and water spraying device. In the actual production process, many equipment can be connected and used, so the water generating device of the motor can be installed with ozone, and the equipment and materials can meet the hygienic requirements of food export.

噴淋清洗機設備主要是對棗、蔬菜、水產生產線的重要產品進行清洗。該設備的主要工作是將適量的水有效地投入到箱體的前部，在運行過程中通過加熱管加熱水，原料將通過箱體，當操作時，它將直接完成軋制狀態。氣泡機和水，并用網帶推進。在水面，高端配備噴頭和高壓沖洗。

Spray cleaning machine is mainly used to clean the important products of jujube, vegetable and aquatic product production line. The main work of the equipment is to put appropriate amount of water effectively into the front of the box. During the operation, the water is heated through the heating pipe, and the raw material will pass through the box. When it is operated, it will directly complete the rolling state. Bubble machine and water, and with mesh belt propulsion. On the water surface, the high-end is equipped with nozzle and high-pressure flushing.

噴淋清洗機設備的功能特點

Functional characteristics of spray cleaning machine

1。高壓噴霧清洗設備的內腔主要由不銹鋼制成。耐酸堿，使用壽命長。

1。 The inner cavity of the high-pressure spray cleaning equipment is mainly made of stainless steel. Acid and alkali resistant, long service life.

2。該設備將有效地配備加熱和溫度自動控制系統，使用其不銹鋼加熱管即可直接加熱。

2。 The equipment will be effectively equipped with heating and temperature automatic control system, which can be directly heated by using its stainless steel heating pipe.

3。采用輥道輸送機，工件運轉平穩，驅動輥均為不銹鋼。

3。 Using roller conveyor, the workpiece runs smoothly, and the driving roller is made of stainless steel.

4。建立液位安全控制系統，確保機器正常運行。

4。 Establish the liquid level safety control system to ensure the normal operation of the machine.

5。提供循環過濾系統以確保溶液的清潔度。

5。 Provide circulating filtration system to ensure cleanliness of solution.

6。往復移動噴涂可在所有方向清洗工件。

6。 Reciprocating spray can clean the workpiece in all directions.

7。高壓噴霧清洗設備有效地利用了扇形陶瓷噴嘴，調節了噴嘴角度，保證了噴嘴的使用壽命。

7。 The high-pressure spray cleaning equipment effectively utilizes fan shaped ceramic nozzles to adjust the nozzle angle and ensure the service life of the nozzles.

8。入口采用橡膠輥和惰輪。進給速度穩定，速度與輥道同步。滾輪與惰輪之間的距離可根據工件的尺寸進行調整。

8。 Rubber roller and idler gear are used at the inlet. The feed speed is stable and the speed is synchronized with the roller table. The distance between the roller and the idler can be adjusted according to the size of the workpiece.

9。高壓噴頭清洗設備頂部裝有吸霧裝置，以保證清潔的工作環境。

9。 The top of the high pressure nozzle cleaning equipment is equipped with a mist absorbing device to ensure a clean working environment.

本文由切絲切片機為您提供，我們的網站是:http://www.pandahousemanalapan.com我們將以全心全意的熱情為您提供更優質的服務，歡迎您的訪問!

This article is provided by the slicing machine http://www.pandahousemanalapan.com We will provide you with better service with wholehearted enthusiasm. Welcome to visit!

關鍵詞：噴淋清洗機